Twinfix P320 Rafter Glazing Bar

With a width of 60mm, the Twinfix P320 rafter supported glazing bar is designed to hide the fixings when fitting to rafters.

The P320 rafter glazing bar comes with 60mm wide rubber rafter gasket which is attached to the rafter using galvanised nails (not supplied by us) at every 300mm along the length.  The bar also comes with a screw down aluminium glazing cap which has a hidden fixing channel and bubble gaskets.  There's also an aluminium top cap which pushes down thus hiding the screw fixings.  A polycarbonate end plate finishes off each bar.

The P320 rafter glazing bar is the best when it comes to glazing either multiwall polycarbonate sheet, solid polycarbonate AND glass - up to 24mm thick.  We recommend replacing the end plates with one of our mechanical end plates when installing glass. You will need to contact your glass supplier for recommended rafter sizes and tolerances.

This glazing bar system is stocked as individual packs in white, brown & anthracite grey (RAL7016) in either 3m or 4m lengths.

Additional individual end plates are also available separately.